Parging
Foundation parging that evens out, protects and finishes the base of your house through Quebec winters.

What is foundation parging?
Parging is the thin cement coating on the visible part of your foundation wall, between the ground and your siding, stucco or veneer. It evens out rough concrete or block, hides small flaws and shields the foundation from moisture and freeze-thaw.
When parging flakes, crumbles or cracks, it is usually telling you water has been getting in behind it. Repairing it early protects the foundation and keeps the base of the house looking sharp.
Benefits of parging your foundation
Hides flaws
Evens out rough concrete, block and old repairs.
Shields the foundation
A cement layer that sheds water and takes the freeze-thaw wear.
Clean finished base
A crisp line between the ground and your siding, stucco or brick.
Protects the concrete
Slows the weathering of the wall you can see above grade.
Durable
Properly mixed and cured parging lasts for years.
Fast repair
Failing patches can be redone without touching the rest of the wall.
Our parging process
- Remove loose and failing materialOld, hollow or crumbling parging is chipped off back to solid concrete.
- Clean and dampen the wallThe wall is cleaned and dampened so it does not pull water out of the new mix too fast.
- Bonding coatA bonding agent or scratch coat is applied where needed so the new layer grips.
- Apply parging in layersCement parging is built up in layers to an even thickness.
- Texture the finishThe surface is finished to a uniform texture that matches the home.
- Cure and protectThe parging cures damp and is protected from frost. We schedule it from spring to fall, never into freezing weather.

When to repair it
- Parging that sounds hollow when tapped
- Flaking, crumbling or missing patches
- Cracks that keep opening after a winter
- A foundation base that no longer matches the rest of the house
- Before new siding, stucco or stone goes on above it
Common questions
When is the best time to parge a foundation?
From spring to fall. Parging has to cure damp and must be protected from frost, so we never schedule it into freezing weather.
Why does my parging keep flaking?
Flaking usually means water has been getting in behind the coating and freezing. We remove the failing material back to solid concrete before applying the new layers.
Can you parge just the damaged section?
Yes. Failing areas can be chipped out and redone, then textured to match the surrounding wall.
Talk to us about your project
Tell us what is happening on your property and we will inspect it, explain the options clearly and give you a written estimate.
Start a Conversation